Fire Warden Training Dates | January

Fire Warden Training Dates | January

Fire Warden Training public course dates for January 2020 are now available from Height Safety Engineers.

This course introduces participants to a variety of portable firefighting equipment commonly found in the workplace. It also instructs in the correct use of fire extinguishers, fire hose reels and fire blankets.

Participants will gain knowledge in how to recognise emergencies in the workplace, timely reporting of emergencies, knowing the appropriate action to take, raising the alarm and evacuating building occupants in a safe manner.

Fire Warden Training includes both theoretical and practical components, with participants gaining hands-on experience using fire fighting equipment under guidance from our experienced emergency services trainers.

Fire Warden Training Dates

Wednesday, 15 January – 10.00am to 2.00pm
Wednesday, 29 January – 10.00am to 2.00pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for Fire Warden Training in January will be run at our flagship training centre in Sydney.

Height Safety Engineers, Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Fees

Fire Warden Training – $125.00

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a statement of attainment in:

  • CPPFES2004A Identify types of installed fire safety equipment and systems
  • CPPFES2005A Demonstrate first attack firefighting equipment
  • PUAWER004B Respond to workplace emergencies

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Fire Warden Training

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

Confined Space Training Dates | January

Confined Space Training Dates | January

Confined Space Training public course dates for January 2020 are now available from Height Safety Engineers.

This is an introductory course for those required to work in and around confined spaces.

Confined Space Training will introduce participants to the hazards common to working in confined spaces, legislation related to high risk work. The course will also cover the duties of a standby person, gas testing atmospheres and working with permits to enter.

Use of associated personal protective equipment (PPE) as well as identification of its limitations will also be covered.

Participants will also gain experience in using various pieces of confined space entry equipment including tripods, davits, personal winches, RPDs, spreader bars, retrieval SRLs and full body harnesses. Administrative tasks such as performing risk assessments and installation of control measures also form part of the course.

Confined Space Training Dates

Tuesday 14 to Wednesday 15 January – 8.00am to 4.00pm

Please note this course runs over two full days.

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for Confined Space Training in January will be run at our state of the art training centre in Melbourne.

Height Safety Engineers Melbourne
12 Mareno Road
Tullamarine, VIC 3043

Course Costs

Confined Space Training – $495.00

Nationally Recognised Qualifications

Successful completion of the confined space refresher training course will grant the participant statements of attainment in:

  • MSMPER200 Work in Accordance With An Issued Permit
  • MSMWHS217 Gas Test Atmospheres
  • RIIRIS201D Conduct Local Risk Control
  • RIIWHS202D Enter and Work in Confined Spaces

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Confined Space Training

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

First Aid and CPR Training Dates | January

First Aid and CPR Training Dates | January

First Aid and CPR Training public course dates for January 2020 are now available from Height Safety Engineers.

This course provides participants with the skills and knowledge to respond to an incident in the workplace or at home requiring first aid.

First Aid and CPR training teaches participants to respond to a variety of common injury types such as burns, bleeding, cuts, asthma, seizures, anaphylaxis, choking, spider bites, snake bites, soft tissue injuries and eye injuries.

Course material will also cover the responsibilities of a first aid officer, managing shock, minimising hazards to themselves and others as well as performing cardiopulmonary resuscitation.

Successful completion of the course will enable the participant to serve as a first aid officer in their workplace or other situation.

Our first aid and CPR training course has been developed with a focus on highly practical scenarios drawn from real life experience and presents situations participants are likely to come across.

First Aid and CPR Training Dates

Sydney
Monday, 13 January – 8.00am to 4.00pm
Monday, 27 January – 8.00am to 4.00pm

Melbourne
Friday, 17 January – 8.00am to 4.00pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for First Aid and CPR Training in January will be run at our state of the art training centres in both Sydney and Melbourne.

Height Safety Engineers Sydney
4 Austool Place
Ingleburn, NSW 2565

Height Safety Engineers Melbourne
12 Mareno Road
Tullamarine, VIC 3043

Course Costs

First Aid and CPR Training – $120.00

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a statement of attainment in:

HLTAID001 – Provide Cardiopulmonary Resuscitation
HLTAID003 – Provide First Aid

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

First Aid and CPR Training

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

Confined Space Refresher Training Dates | January

Confined Space Refresher Training Dates | January

Confined Space Refresher Training public course dates for January 2020 are now available from Height Safety Engineers.

The refresher course is designed for those that have previously completed the Confined Space Training course within the last three (3) years, but need to ensure their knowledge and work practices are up to date as part of a job requirement or site rules.

Confined Space Refresher training course covers aspects of working in and around confined spaces including relevant legislation and standards relating to safe work, a standby person and their duties, identification and correct use of personal protective equipment (PPE), gas testing atmospheres and working with permits.

Please note Confined Space Training Refresher does not cover the usage of, or competency in the use of, breathing apparatus.

Confined Space Training Refresher Dates

Friday, 10 January – 8.00am to 4.00pm
Friday, 24 January – 8.00am to 4.00pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for Confined Space Refresher Training in January will be run at our state of the art training centre in Melbourne.

Height Safety Engineers Melbourne
12 Mareno Road
Tullamarine, VIC 3043

Course Costs

Confined Space Refresher – $295.00

Nationally Recognised Qualifications

Successful completion of the confined space refresher training course will grant the participant statements of attainment in:

  • MSMPER200 Work in Accordance With An Issued Permit
  • MSMWHS217 Gas Test Atmospheres
  • RIIRIS201D Conduct Local Risk Control
  • RIIWHS202D Enter and Work in Confined Spaces

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Confined Space Refresher

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

Work Safely at Heights Training Dates | January

Work Safely at Heights Training Dates | January

RIIWHS204D Work Safely at Heights public course dates for January 2020 are now available from Height Safety Engineers.

RIIWHS204D Work Safely at Heights is an introductory course for those working in areas where there is a risk of sustaining injury or death through a fall from height.

The course teaches participants the basics of relevant legislation and standards covering height safety, performing a risk assessment and installation of control measures. It also covers identification of suspension trauma after a fall, how to correctly fit and use a fall arrest harness as well as introducing a range of different fall arrest systems.

Participants also gain knowledge around safely using tools while working at height, how to select the correct personal protective equipment (PPE) to use plus how to inspect their PPE before and after work to ensure it is kept in best operational condition and functioning correctly.

RIIWHS204D Work Safely at Heights Dates

Sydney
Thursday, 09 January – 8.00am to 4.30pm
Thursday, 16 January – 8.00am to 4.30pm
Thursday, 23 January – 8.00am to 4.30pm
Thursday, 30 January – 8.00am to 4.30pm

Melbourne
Thursday, 09 January – 8.00am to 4.00pm
Thursday, 16 January – 8.00am to 4.00pm
Thursday, 23 January – 8.00am to 4.00pm
Thursday, 30 January – 8.00am to 4.00pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for RIIWHS204D Work Safely at Heights in January will be run at our state of the art training centres in both Sydney and Melbourne.

Height Safety Engineers Sydney
4 Austool Place
Ingleburn, NSW 2565

Height Safety Engineers Melbourne
12 Mareno Road
Tullamarine, VIC 3043

Course Costs

RIIWHD204D Work Safely at Heights – $295.00

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a statement of attainment in:

  • RIIWHS204D Work Safely at Heights

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Work Safely at Heights

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

Working Safely with Asbestos Containing Materials Training Dates | January

Working Safely with Asbestos Containing Materials Training Dates | January

10559NAT Course in Working Safely with Asbestos Containing Materials public course dates for January 2020 are now available from Height Safety Engineers.

Working Safely with Asbestos Containing Materials extends the skills and knowledge obtained in 10675NAT Course in Asbestos Awareness.

In this course, participants will learn how to prepare a work-site, correct usage of personal protective equipment (PPE), techniques for the safe drilling and cutting of asbestos containing material as well as decontamination processes to undertake at the completion of work.

As with the Asbestos Awareness course, 10559NAT Course in Working Safely with Asbestos Containing Materials is a required competency for anyone working in the Australian Capital Territory (ACT) whose employer, or other person conducting a business or undertaking (PCBU), reasonably believes will come into contact with asbestos or asbestos containing material.

There are a number of occupations where holding a statement of attainment in this course may be required, including but not limited to, air-conditioning and mechanical services plumber, air-conditioning and refrigeration technician, data and telecommunications cabler, general and special class electricians, gas fitter, plumber, telecommunications technician, electrical or telecommunications trades assistant or plumber’s assistant.

Please note it is a pre-requisite of this course that a participant already hold a statement of attainment in 10675NAT Course in Asbestos Awareness.

10559NAT Course in Working Safely with Asbestos Containing Materials Dates

Tuesday, 07 January – 12.30pm to 4.30pm
Tuesday, 14 January – 12.30pm to 4.30pm
Tuesday, 21 January – 12.30pm to 4.30pm
Tuesday, 28 January – 12.30pm to 4.30pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for 10559NAT Course in Working Safely with Asbestos Containing Materials in January will be run at our flagship training centre in Sydney.

Height Safety Engineers, Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Fees

10559NAT Course in Working Safely with Asbestos Containing Materials – $450.00

Special Deal
Book a place in both this course and 10675NAT Course in Asbestos Awareness at the same time and receive a $75.00 discount. Call us on 1300 884 978 or email training@heightsafety.net to get your discount code.

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a statement of attainment in:

  • 10559NAT Course in Working Safely with Asbestos Containing Materials

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Course in Working Safely with Asbestos Containing Materials

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

Asbestos Awareness Training Dates | January

Asbestos Awareness Training Dates | January

10675NAT Course in Asbestos Awareness public course dates for January 2020 are now available from Height Safety Engineers.

Public training sessions in 10675NAT Course in Asbestos Awareness during January 2020 are now open for booking from Height Safety Engineers (RTO 91227) in Sydney.

If you work in areas that may be contaminated with asbestos or have asbestos containing materials in them, it is vital you know how to identify and report that contamination or those materials.

The course also teaches about the hazards associated with inhalation of asbestos fibres, and participants will also learn about precautions available to be taken upon the discovery of asbestos or asbestos containing material.

Best practice reporting procedures and understanding of duties of care also form part of the material taught in this nationally-recognised training course.

For those in the Australian Capital Territory (ACT) where their employer or other person conducting a business or undertaking (PCBU) reasonably believes a risk of contact with asbestos or asbestos containing material, this course is a required competency to hold.

Occupations where this may be the case include, but are not limited to, cleaners, plumbers, labourers, landscapers, engineers, fencers, glaziers, locksmiths, construction workers, air-conditioning technicians and electricians.

10675NAT Course in Asbestos Awareness Dates

Tuesday, 07 January – 8.00am to 12.00pm
Tuesday, 14 January – 8.00am to 12.00pm
Tuesday, 21 January – 8.00am to 12.00pm
Tuesday, 28 January – 8.00am to 12.00pm

The above are public course dates for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors. Contact our expert training team on 1300 884 978 or emailing training@heightsafety.net to discuss how Height Safety Engineers can provide you with best practice training in nationally-recognised courses.

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Discounted course fees may be applicable for group bookings.

Location

Public classes for 10675NAT Course in Asbestos Awareness in January will be run at our flagship training centre in Sydney.

Height Safety Engineers, Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Fees

10675NAT Course in Asbestos Awareness – $220.00

Special Deal
Book a place in both this course and 10559NAT Course in Working Safely with Asbestos Containing Materials at the same time and receive a $75.00 discount. Call us on 1300 884 978 or email training@heightsafety.net to get your discount code.

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a nationally recognised statement of attainment in:

  • 10675NAT Course in Asbestos Awareness

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Course in Asbestos Awareness

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

About Height Safety Engineers

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

December Safety Training Course Dates | Public Courses

December Safety Training Course Dates | Public Courses

Height Safety Engineers are running a number of public safety courses this December across a number of disciplines.

A leading provider of safety training, Height Safety Engineers offers a broad scope of courses including working at heights, in and around confined spaces, asbestos safety, first aid, technical rescue and more.

Every month, we offer a number of public dates in our most popular training courses at our state-of-the-art training centres in Sydney and Melbourne.

Alongside these dates, we can also provide private and bespoke training for the industries including building, construction, mining, telecommunications, building management and more. Private courses can be run at our training centres or at a location convenient for you through the use of our mobile working at heights and confined space simulation trailers.

Call our expert training team on 1300 884 978 or email training@heightsafety.net to discuss how Height Safety Engineers can support safe work practices for your business today.

Discover more about what makes Height Safety Engineers your best training partner at www.heightsafety.net/training.

December 2019 Public Training Courses

10675NAT Course in Asbestos Awareness

Learn how to identify areas on a job-site where asbestos may be present with this nationally accredited course.

10559NAT Course in Working Safely with Asbestos Containing Materials

Gain skills in staying safe if required to work with materials that may contain asbestos.

RIIWHS204D Work Safely at Heights

Introductory course in safe work practices and fall arrest protection for those working at heights.

Confined Space Training

Explore safe work methods and correct PPE to use when working in confined spaces.

First Aid and CPR Training

Become a first aid officer at your workplace by completing this training course.

RIIHAN301E Operate Elevating Work Platform

Learn how to safely operate and maintain an elevating work platform (under 11m)

Full Scope of Courses

Can’t find the training course you’re looking for or require industry-specific training? Download a copy our of a training catalogue to explore the full scope of accredited and non-accredited training courses Height Safety Engineers offer beyond these public dates.

Courses can be localised to the specific needs of your industry or work-site by our team of experienced expert trainers and assessors.

Call 1300 884 978 or email training@heightsafety.net to find out how we can help your workers achieve best practice safety with training that is made perfect.

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA).

RIIHAN301E Operate Elevating Work Platform (EWP) Under 11m Training Dates | December

RIIHAN301E Operate Elevating Work Platform (EWP) Under 11m Training Dates | December

Undertake training in the operation of an elevating work platform (under 11m) this December with the working at heights experts at Height Safety Engineers.

Height Safety Engineers (RTO 91227) will be running its one-day training course in the operation of an elevating work platform (EWP) this December in Sydney.

RIIHAN301E Operate Elevating Work Plaform instructs participants in the planning of work to be undertaken using an EWP, conducting routine maintenance checks before work, how to set up the EWP, operating the EWP and the safe shutdown and securing of the EWP at the conclusion of work.

This course is aimed at anyone who may be required to operate an elevating work platform under 11m.

Height Safety Engineers’s course primarily uses a boom-type EWP, however a scissor-lift style EWP may be able to used on request.

For the purposes of this course, a boom-type EWP means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated.

While this course contains material that relates to the National Standard for High Risk Work, successful completion will not make a participant eligible to recieve a high risk work licence.

RIIHAN301E Operate Elevating Work Platform Date

Thursday, 19 December – 8.00am to 4.30pm

The above is a public course date for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors by contacting our expert training team on 1300 884 978 or emailing training@heightsafety.net

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Group discounts may be applicable for group bookings.

Location

The public class for RIIHAN301E Operate Elevating Work Platform Training in December will be run at our flagship training centre in Sydney.

Height Safety Engineers, Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Fees

RIIHAN301E Operate Elevating Work Platform – $300.00

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive a statement of attainment in:

RIIHAN301E Operate Elevating Work Platform

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

Operate Elevating Work Platform (Under 11m)

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.

First Aid and CPR Training Dates | December

First Aid and CPR Training Dates | December

Learn the skills and gain the knowledge needed to provide a first aid response to an accident in your workplace and provide cardiopulmonary resuscitation (CPR) with this nationally recognised training course.

Height Safety Engineers (RTO 91227) will be running a public training course in first aid and CPR this December at their state of the art training centre in Sydney.

The first aid and CPR training course will teach participants a broad range of skills in the application of first aid including response to burns, bleeding, cuts, asthma, seizures, anaphylaxis, choking, spider and snake bites as well as soft tissue and eye injuries.

Participants will also engage with material about the responsibilities of first aid officer, managing shock, minimising hazards to themselves and others, and the performance of CPR procedures.

Successful completion of this training first aid and CPR training course will qualify a participant to act as a first aid officer in their workplace or other situation.

Height Safety Engineers’s first aid and CPR course is highly practical and focuses on real life safety scenarios participants are likely to come across.

First Aid and CPR Training Date

Monday, 9 December – 8.00am to 4.00pm

The above is a public course date for training at Height Safety Engineers.

Private courses can be arranged by employers and other persons conducting a business or undertaking for their employees and contractors by contacting our expert training team on 1300 884 978 or emailing training@heightsafety.net

Private courses can be held at our training centres in Sydney and Melbourne, or at your office, job site, work site or warehouse through the use of our mobile simulation trailers.

Group discounts may be applicable for group bookings.

Location

The public class for First Aid and CPR Training in December will be run at our flagship training centre in Sydney.

Height Safety Engineers, Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Fees

First Aid and CPR Training – $220.00

Nationally Recognised Qualifications

Successful completion of the course and its assessment task will qualify the participants to receive statements of attainment in:

HLTAID001 – Provide Cardiopulmonary Resuscitation
HLTAID003 – Provide First Aid

Further Information

Additional information on this course, including pre-requisites and enrollment requirements, is available from our student portal through the link below.

First Aid and CPR Training

You can contact Height Safety Engineers’s training team on 1300 884 978 or email training@heightsafety.net.

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority (ASQA). More information about undertaking training courses at Height Safety Engineers is available from at www.heightsafety.net/training.