First Aid and CPR Training Course Dates | October

First Aid and CPR Training Course Dates | October

Height Safety Engineers will be running a first aid and CPR training course at our state-of-the-art Sydney training facility in October 2019.

Successful completion of the first aid and CPR training course qualifies a participants to stand as a first aid representative in their workplace.

This course provides participants with the skills and knowledge required to provide a first aid response to a casualty. It is aimed at those workers who may be required to provide a first aid response in a range of situations, including community and workplace settings.

Participants will cover responses to choking, anaphylaxis, soft tissue and eye injuries, cardiopulmonary resuscitation, snake bites, bleeding, burns, fractures and more over this full day course.

First Aid and CPR Training Date

October
Wednesday, 9 October – 8.00am to 4.00pm

If you cannot make this date, or are an employer wishing to book a large team, get in touch with our friendly staff by calling 1300 884 978 to discuss organising a private training session with us. Private sessions can be held at our state-of-the art training facilities, or at your site through the use of our mobile simulation trailers.

All training courses provided by Height Safety Engineers are run by our fully qualified and experienced trainers and assessors.

Location

This first aid and CPR training course will be run out of our flagship training facility in Sydney:

Height Safety Engineers Sydney
4 Austool Place
Ingleburn, NSW 2565

Course Costs

First Aid and CPR Training – $140.00 (full day)

Detailed information on the course’s contents and attainable qualifications following successful completion is available from out online student portal by clicking the link below.

First Aid and CPR Training

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority.

Discover more of our industry-leading training courses by visiting our website: www.heightsafety.net.

Low Voltage Rescue and CPR Training Course Dates | October

Low Voltage Rescue and CPR Training Course Dates | October

Height Safety Engineers will be holding a training course in low voltage rescue and cardiopulmonary resuscitation (CPR) at our Melbourne training centre in October.

This course teaches the skills to perform a rescue from a live, low voltage (LV) apparatus and then perform CPR until additional medical support arrives.

Please note this course does not cover rescue from overheard electrical transmission lines or underground cables that carry higher voltage electricity.

Our low voltage rescue and CPR training course will cover identifying hazards, electrical isolation procedures, safe approaches to a live electrical panel, assessment of the casualty, performing CPR and more.

This course designed for anybody working around live, low-voltage electrical apparatus who may be required to respond and remove a person from a live panel in an emergency.

Low Voltage Rescue and CPR Date

October
Wednesday, 9 October – 8.00am to 12.00pm

If you cannot make this date, or are an employer wishing to book a large team, get in touch with our friendly staff by calling 1300 884 978 to discuss organising a private training session with us. Private sessions can be held at our state-of-the art training facilities, or at your site through the use of our mobile simulation trailers.

All training courses provided by Height Safety Engineers are run by our fully qualified and experienced trainers and assessors.

Location

This course will be run out of our Melbourne training facility:

Height Safety Engineers Melbourne
12 Mareno Road
Tullamarine, VIC 3043

Course Costs

Low Voltage Rescue and CPR – $165.00 (half-day)

Detailed information on the course’s contents and attainable qualifications following successful completion is available from out online student portal by clicking the link below.

Low Voltage Rescue and CPR Training

Height Safety Engineers is a Registered Training Organisation (RTO 91227) under the Australian Skills Quality Authority.

Discover more of our industry-leading training courses by visiting our website: www.heightsafety.net.

First Aid and CPR Training Courses | September Course Dates

First Aid and CPR Training Courses | September Course Dates

Height Safety Engineers will be running classes for their first aid and CPR training course during September.

First aid and CPR training provides the skills and knowledge required to provide a first aid response to a casualty in a range of situations, including community and workplace settings.

Successful completion of the first aid and CPR training course qualifies participants to be a first aid representative in their workplace and other required situations.

The first aid and CPR course is highly practical and focuses on real-life scenarios that the participant can put into practice.

First Aid and CPR Training Course Dates

Melbourne
Tuesday, 23 September – 8.00am to 4.00pm

Sydney
Wednesday, 25 September – 8.00am to 4.00pm

Location

First aid and CPR training courses in Sydney are run out of our flagship training facility located at 4 Austool Place, Ingleburn.

Melbourne courses are held at our Victorian satellite training centre located at 12 Mareno Road, Tullamarine.

All courses are run by our experienced trainers and successful completion of the course results in acquisition of a nationally-recognised qualification.

Course Costs

First Aid and CPR Training – $220

Employers and organisations that wish to enroll a number of students into a single class may be eligible for a discount on course fees.

Please call our friendly staff on 1300 884 978 to discuss your training needs.

Detailed information about the course’s contents and statements of attainment/certificates of attendance that can be gained through successful completion of the course are available through our online student portal below.

First Aid and CPR Training Course Details

Bookings are open until the day of the course. Book your spot today.

Height Safety Engineers is a Registered Training Organisation (RTO, 91227) under the Australian Skills Quality Authority (ASQA).

Training Services

Training courses in height safety, asbestos, confined space access, first aid, rescue and high-risk work licencing

Height Safety Engineers provide the building, construction, mining, energy and other industries with high-quality training. Training courses are available for those who work at heights, in confined spaces or at sites contaminated with asbestos.

 

We also offer first aid training as well as workplace health and safety courses.

 

We hold classes at our state of the art training facility. Here, we are able to simulate realistic height safety and confined space situations.

 

Students can experience working on roofs, communication towers, raised platforms and more.

 

Hold classes on your site to add priceless site-specific context to your lesson.

 

Our expert instructors bring decades of experience to the classroom. Students gain skills and knowledge unavailable anywhere else.

 

This experience allows students to not only work safely, but also identify problems at their job site.

 

Height Safety Engineers design courses to grow with students as their skills and experience develop over time.

 

Access advanced training and rescue courses to complement increases in experience and responsibility.

 

For Height Safety Engineers, training is not about ticking a box and achieving the bare minimum. Training is about preparing students in the best possible way to ensure their work sites are safe, their colleagues are safe and they are safe.

 

Height Safety Engineers is a Registered Training Organisation (RTO 91227), providing nationally recognised training.

 

You can explore our training courses above, or contact us on 1300 884 978 to speak to our expert staff about your training requirements.

Participants in the Course in Asbestos Awareness are taken through the learning outcomes at the beginning of the course.

Download a PDF Brochure